<?xml version="1.0" encoding="UTF-8"?>
<rss version="2.0"
	xmlns:content="http://purl.org/rss/1.0/modules/content/"
	xmlns:wfw="http://wellformedweb.org/CommentAPI/"
	xmlns:dc="http://purl.org/dc/elements/1.1/"
	xmlns:atom="http://www.w3.org/2005/Atom"
	xmlns:sy="http://purl.org/rss/1.0/modules/syndication/"
	xmlns:slash="http://purl.org/rss/1.0/modules/slash/"
	>

<channel>
	<title>戒往&#039;Blog</title>
	<atom:link href="http://justchen.com/feed" rel="self" type="application/rss+xml" />
	<link>http://justchen.com</link>
	<description>放了自已,才能高飞!</description>
	<lastBuildDate>Fri, 18 May 2012 03:40:54 +0000</lastBuildDate>
	<language>en</language>
	<sy:updatePeriod>hourly</sy:updatePeriod>
	<sy:updateFrequency>1</sy:updateFrequency>
	<generator>http://wordpress.org/?v=3.3.2</generator>
		<item>
		<title>自定义orcad中的Title Block</title>
		<link>http://justchen.com/1029.html</link>
		<comments>http://justchen.com/1029.html#comments</comments>
		<pubDate>Fri, 18 May 2012 03:40:54 +0000</pubDate>
		<dc:creator>戒网</dc:creator>
				<category><![CDATA[EDA应用]]></category>
		<category><![CDATA[orcad]]></category>
		<category><![CDATA[title block]]></category>

		<guid isPermaLink="false">http://justchen.com/?p=1029</guid>
		<description><![CDATA[新建一个DSN档后,每页都会有Title Block,实际上这个Title Block也是一个元件,它会在原理图中的Design Cache中留一个cache. 这样我们就可以copy Design Cache中的相关Title Block元件,再Paste到自已建铁库中,修改即可. 在后来的原理图中,删除自带的TitleBlock,再用Place -> Title Block的功能放置新修改的Title Block.]]></description>
		<wfw:commentRss>http://justchen.com/1029.html/feed</wfw:commentRss>
		<slash:comments>0</slash:comments>
		</item>
		<item>
		<title>猪八戒网..就是一个骗钱的网站</title>
		<link>http://justchen.com/1017.html</link>
		<comments>http://justchen.com/1017.html#comments</comments>
		<pubDate>Sun, 15 Apr 2012 02:35:19 +0000</pubDate>
		<dc:creator>戒网</dc:creator>
				<category><![CDATA[网络技术]]></category>
		<category><![CDATA[猪八戒网]]></category>
		<category><![CDATA[骗子]]></category>
		<category><![CDATA[骗钱]]></category>

		<guid isPermaLink="false">http://justchen.com/?p=1017</guid>
		<description><![CDATA[前段时间在猪八戒网发布了一个做网站任务,任务时间一个月,发现需要交诚意金,想想猪八戒网也算是一个大网站了,应该不算骗子网站之类的,也没想太多,就交了99元. 过了一段时间后,任务被一服务商抢标,然而到了任务的最后一天,服务商就还是完成不了目标,就主动放弃目标了,这样我整个时间就拖了一个月,朋友说也来不及,就找其他人去做了.最后再看猪八戒网的那个诚意金,居然无法退,因为他们的规则是"若买家发布任务后，经过抢标期，没有服务商抢标，诚意金退还至买家账户中",,但我的情况是,有人抢标,但最后放弃的,不在这个范围内.所以想退钱,就别做梦了,以下是对话详情 他们所有的回答都是"客服正在输入中,请稍等....."我开始以为这是浏览器问题..从后来的对话看出来,这是一句标准的回答 换了浏览器再去资询,说可以有个维权选项,但没找到]]></description>
		<wfw:commentRss>http://justchen.com/1017.html/feed</wfw:commentRss>
		<slash:comments>2</slash:comments>
		</item>
		<item>
		<title>新工作.如何去面对</title>
		<link>http://justchen.com/1013.html</link>
		<comments>http://justchen.com/1013.html#comments</comments>
		<pubDate>Fri, 06 Apr 2012 15:08:53 +0000</pubDate>
		<dc:creator>戒网</dc:creator>
				<category><![CDATA[记事本]]></category>

		<guid isPermaLink="false">http://justchen.com/?p=1013</guid>
		<description><![CDATA[来到上海快两年.成天过着混天度日的日子.终于在前段时间失业了,本来曾想好好地休息一段时间,安安心心地找一份更适合自已的工作,但几天下来发现自已的钱在哗哗地向外流时,我才发现我又不得不马上找新工作了. 我换的工作不少,每次都是对新的工作充满着信心与希望.但是以非常遗憾的结尾收场,一次又一次地失望已经让我不再对新的工作充满新的热情,也过了曾经那个有梦想有信仰的年纪,渐渐地对新的工作变得麻木起来. 现在已经上班两天,也还能依稀感受得到新的压力是多么地大,但现在我没有找到什么理由去接受这些压力.so how do I do?]]></description>
		<wfw:commentRss>http://justchen.com/1013.html/feed</wfw:commentRss>
		<slash:comments>4</slash:comments>
		</item>
		<item>
		<title>ucos ii 2.86 移植笔记(STM32)</title>
		<link>http://justchen.com/1008.html</link>
		<comments>http://justchen.com/1008.html#comments</comments>
		<pubDate>Sat, 24 Mar 2012 16:14:59 +0000</pubDate>
		<dc:creator>戒网</dc:creator>
				<category><![CDATA[uC/OS uC/GUI]]></category>
		<category><![CDATA[ucos移植]]></category>

		<guid isPermaLink="false">http://justchen.com/?p=1008</guid>
		<description><![CDATA[一:缺少 app_cfg.h os_cfg.h app_cfg.h 是用户应用程序的一些定义,链接等,新建一个空文件即可 os_cfg 是uCOS的配置文件&#160; 将Source文件夹中的os_cfg_r.h改名,然后根据自已的情况修改 二: OS_TASK_TMR_PRIO 未定义 从官方PDF中得知,从UCOS 2.81中引入了 timer manager的这么个东东.根据其说明,应该是可以创建一个定时任务,可以进行任务回调的功能.而OS_TASK_TMR_PRIO就是定义timer manager任务的优先级. 我们可以在app_cfg.h中将其定义,,优先级现在就任意吧.当然也可以使用绝招,在os_cfg.h中将OS_TMR_EN禁用.当然这是在不使用timer manager功能的前提下. 三:发现一堆app_***Hook的函数未定义 据网上的人们说,这是一个调用一些钩子程序,拿来调试应用程序用的,我们直接在os_cfg.h中将OS_APP_HOOKS_EN设为0,禁用掉.其功能以后研究 四:OS_CPU_SysTickClkFreq 未定义 根据文档,在os_cpu_c.c中会调用OS_CPU_SysTickInit初始化SysTick,在这个函数中还会调用OS_CPU_SysTickClkFreq取得当前CPU频率. 这样,根据国际惯例,在bsp中实现这个函数即可.之后就能够通过编译了. 五:将OS_CPU_PendSVHandler与OS_CPU_SysTickHandler添加到启动文件的向量表中,原因大家都懂的 最后就是建立自已的任务了,要注意的是,所有系统的初始化放到第一个任务中进行,初始化完成后可以删除任务或是进行其他操作,主要的初始化对象为systick时钟,]]></description>
		<wfw:commentRss>http://justchen.com/1008.html/feed</wfw:commentRss>
		<slash:comments>0</slash:comments>
		</item>
		<item>
		<title>常用器件及其重要参数</title>
		<link>http://justchen.com/1001.html</link>
		<comments>http://justchen.com/1001.html#comments</comments>
		<pubDate>Tue, 20 Mar 2012 09:11:00 +0000</pubDate>
		<dc:creator>戒网</dc:creator>
				<category><![CDATA[硬件设计]]></category>
		<category><![CDATA[器件参数]]></category>

		<guid isPermaLink="false">http://justchen.com/?p=1001</guid>
		<description><![CDATA[一:TVS(瞬态电压抑制器) TVS主要用于ESD防护,其特性与稳压二极管相似 主要参数: 1:dir 主要是双向还是单向保护,单向的与稳压管类似,双向就是两个单向的头尾相串 2:Vbr 最小击穿电压 3:Ppk 峰值功率 4:IR 击穿电流(反向的) 二:常规电容(排除超级电容之类的) 1:ESR 串联等效电阻.]]></description>
		<wfw:commentRss>http://justchen.com/1001.html/feed</wfw:commentRss>
		<slash:comments>0</slash:comments>
		</item>
		<item>
		<title>allegro经验之:鼠线</title>
		<link>http://justchen.com/998.html</link>
		<comments>http://justchen.com/998.html#comments</comments>
		<pubDate>Sun, 18 Mar 2012 09:05:11 +0000</pubDate>
		<dc:creator>戒网</dc:creator>
				<category><![CDATA[EDA应用]]></category>
		<category><![CDATA[allegro鼠线]]></category>

		<guid isPermaLink="false">http://justchen.com/?p=998</guid>
		<description><![CDATA[allgero的鼠线显示及隐藏方式有很多种,除了最常见的Dispay -> show/blank rats外.还可以通过 Edit -> Properties 然后选择相应的网络,在弹出来的对话框中选择no rat为ture这样也不会显示鼠线,但极不推荐这样做,因为要是忘了设置显示回去就麻烦了. 还要以在properties中设置一个voltage,这样也能消除鼠线,并且还会单独地使用一个标记,这样查找起来相当方便.对于电源及地非常有用. 值得一提的是,这个properties非常强大.以后再来慢慢挖掘]]></description>
		<wfw:commentRss>http://justchen.com/998.html/feed</wfw:commentRss>
		<slash:comments>0</slash:comments>
		</item>
		<item>
		<title>allegro经验之:圆角</title>
		<link>http://justchen.com/993.html</link>
		<comments>http://justchen.com/993.html#comments</comments>
		<pubDate>Sun, 18 Mar 2012 08:48:03 +0000</pubDate>
		<dc:creator>戒网</dc:creator>
				<category><![CDATA[EDA应用]]></category>
		<category><![CDATA[allegro圆角]]></category>

		<guid isPermaLink="false">http://justchen.com/?p=993</guid>
		<description><![CDATA[一:板框或其他line画的图形圆角化 首先选择Manufacture(制造) -> Drafating(制图) -> Fillet(平滑化) 选项,如下图: 然后在options中的radius填入适当的半径值.再点选两条直线就可以了. 要注意的是,此举只对Line画的框有效..]]></description>
		<wfw:commentRss>http://justchen.com/993.html/feed</wfw:commentRss>
		<slash:comments>0</slash:comments>
		</item>
		<item>
		<title>ubuntu下github的使用</title>
		<link>http://justchen.com/988.html</link>
		<comments>http://justchen.com/988.html#comments</comments>
		<pubDate>Fri, 16 Mar 2012 02:11:36 +0000</pubDate>
		<dc:creator>戒网</dc:creator>
				<category><![CDATA[网络技术]]></category>
		<category><![CDATA[github]]></category>

		<guid isPermaLink="false">http://justchen.com/?p=988</guid>
		<description><![CDATA[一：创建Repositories 1:首先在github下创建一个帐号。这个不用多说，然后创建一个Repositories。 2:然后在ubuntu下安装git相关的东东： 1 sudo apt-get install git-core git-gui git-doc -y 3:在ubuntu本地创建一个ssh密匙： 1 ssh-keygen -t rsa -C &#34;your_email@youremail.com&#34; 会提示在用户home目录下.ssh子文件夹中生成一个密匙，然后要求输也密码等等,最后会得下如下提示: 其中会在/~/home/.ssh/文件夹中生成id_rsa.pub与id_rsa两个文件.其中id_rsa是私钥,保存存在本地,id_rsa.pub是公钥. 然后将公钥中的内容粘贴到你github帐号中的SSH Public Keys的位置。注意小心不要复制到空格。 4:测试ssh是否连接正常(由于github官网有存在被G[F]\W的可能,你可能需要V[P\N]). 1 ssh -T git@github.com 注意git@github.com不能改变,那是github官网的地址.运行之后会提示是否接受新的sshkey请求,输入'yes',然后还会有一个请求访问我们刚才建立的id_rsa私钥请求,这时输入私钥的密码,如果得到如下提示就表示成功: 1 Hi justchen! You've successfully authenticated, but GitHub does not provide shell access. 5:接下来就是最重要的环节了,配置github的环境. 第一次初始化git项目目录的话,建立项目目录,然后进入目录再依次运行以下命令进行初始化. 1 2 3 4 5 6 7 8 9 10 11 [...]]]></description>
		<wfw:commentRss>http://justchen.com/988.html/feed</wfw:commentRss>
		<slash:comments>0</slash:comments>
		</item>
		<item>
		<title>TI AM335X GPIO笔记</title>
		<link>http://justchen.com/949.html</link>
		<comments>http://justchen.com/949.html#comments</comments>
		<pubDate>Sun, 11 Mar 2012 10:19:18 +0000</pubDate>
		<dc:creator>戒网</dc:creator>
				<category><![CDATA[TI ARM]]></category>
		<category><![CDATA[AM335X]]></category>
		<category><![CDATA[GPIO]]></category>

		<guid isPermaLink="false">http://isfate.com/?p=949</guid>
		<description><![CDATA[基于TI AM335X,TI其他系列U也应该差不多 特性: 每个GPIO都可以通过GPIO_OE寄存器设置为输出模式 GPIO输出出是通过写入GPIO_DATAOUT寄存器实现 GPIO的输入可以经过一个硬件的去抖动配置 GPIO的数据输入是通过读取GPIO_DATAIN寄存器实现的 在主动模式下,GPIO的输入检测可以使用电平或是触发方式.在触发方式,可以检测上升沿与下降沿. 仅GPIO0可以唤醒设备 GPIO需要两个时钟源,de-bouncing时钟源用于消抖动(好像是使用的32K时钟),还有一个主时钟clk,一般是使用PLL的100M(CORE_CLKOUTM4/2). GPIO的模式: 略... 常用GPIO寄存器: 管脚复用功能在CONTROL MODULE中设置,除了复用功能外,还有上下拉使能,接收使能及管脚速度. GPIO功能寄存器在GPIO描术中有,其中常用的的有CLEARDATAOUT SETDATAOUT CTRL及OE还有中断状态也在这里设置 GPIO功能设置流程:也可以参见我的点灯日志beaglebone 点灯笔记 注要流程为 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 /* 设置GPIO管脚复用模式 */ leds_devp-&#62;control_mode = ioremap_nocache&#40;TIA8_CTRLMOD,0x2000&#41;; __raw_writel&#40;GPIO_GENERALLY,leds_devp-&#62;control_mode+CONF_GPMC_A5&#41;; //配置默认GPIO管脚功能 __raw_writel&#40;GPIO_GENERALLY,leds_devp-&#62;control_mode+CONF_GPMC_A6&#41;; __raw_writel&#40;GPIO_GENERALLY,leds_devp-&#62;control_mode+CONF_GPMC_A7&#41;; __raw_writel&#40;GPIO_GENERALLY,leds_devp-&#62;control_mode+CONF_GPMC_A8&#41;; iounmap&#40;&#40;void *&#41;&#40;leds_devp-&#62;control_mode&#41;&#41;; &#160; /* 设置GPIO使能及允许输出 [...]]]></description>
		<wfw:commentRss>http://justchen.com/949.html/feed</wfw:commentRss>
		<slash:comments>0</slash:comments>
		</item>
		<item>
		<title>ArchLinux安装subversion+submin+trac手记</title>
		<link>http://justchen.com/978.html</link>
		<comments>http://justchen.com/978.html#comments</comments>
		<pubDate>Sat, 10 Mar 2012 06:52:13 +0000</pubDate>
		<dc:creator>戒网</dc:creator>
				<category><![CDATA[网络技术]]></category>
		<category><![CDATA[archlinux]]></category>
		<category><![CDATA[submin]]></category>
		<category><![CDATA[svn]]></category>
		<category><![CDATA[trac]]></category>

		<guid isPermaLink="false">http://justchen.com/?p=978</guid>
		<description><![CDATA[以前都是在debian/ubuntu下安装的,现在在linode的机器上运行的是archlinux,但这个系统一点都不熟悉.折腾了很多.现记录一下以后也许用得上. 一:安装subversion 这个简单,按照ARCH的官方方法,没一般没啥问题: 1 pacman -S subversion 然后就是配置apache,参数与以前debian/ubuntu没啥差别,参见:ubuntu/debian下安装SVN,TRAC,Submin实代码托管,Bug追踪等 二:将默认的python3替换为python2 实际上早就应该这样做了的. 注意:arch默认的是python3,冒然地替换为python2可能会引起一些其他兼容问题.请考量,由于我的服务器只运行了web服务器,暂时未发现问题. 方法:先将/usr/bin/python改名为/usr/bin/python--3 以免出问题还可以换回去, 然后做个链接: 1 ln /usr/bin/python2 /usr/bin/python 这样,默认的python命令就是python2了. 三:安装submin 在submin官网下载的源码包进行安装,发现安装不了.后来在arch官网发现了这个:https://aur.archlinux.org/packages.php?ID=30214看来是有人已经做好了适用于arch的PKGBUILD包.先下载,然后makepkg安装 发现submin 2.x版本还在无法在arch上运行良好,换回1.2版 1 2 3 4 5 wget http://supermind.nl/submin/current/submin-1.2.11.tar.gz tar zxvf sub* cd sub* python2 bin/install.py /usr/local/submin &#40;注意安装路径&#41; /usr/local/submin/bin/submin-admin create default --apache-user http &#40;指定apache是以http的用户运行的&#41; 在运行/usr/local/submin/bin/submin-admin create default --apache-user http后应该会得到一个如下的提示 1 2 3 4 5 [...]]]></description>
		<wfw:commentRss>http://justchen.com/978.html/feed</wfw:commentRss>
		<slash:comments>0</slash:comments>
		</item>
	</channel>
</rss>

